NAMZ THROTTLE-BY-WIRE THROTTLE GRIP SENSOR HARLEY-DAVIDSON 2008-2013

Restore precise electronic throttle response with the Namz throttle grip sensor for Throttle-by-Wire systems. Designed as a plug-and-play replacement for Harley-Davidson models with e-throttle, it features wiring prepared for clean routing through the handlebar.

Main features

• Brand: Namz.
• Replacement throttle sensor for electronic Throttle-by-Wire systems.
• Plug-and-play installation on e-throttle compatible models.
• Fixed wiring between the sensor and the main harness connection, as used on OEM CVO versions.
• Pre-installed terminals using MIL-SPEC crimping presses.
• Includes a 6-position OEM male connector to complete installation after routing the harness through the inside of the handlebar.
• 6-position connector OEM reference: 72188-07BK.
• Includes a 2-position OEM male connection for heated grips.
• Heated grip connection OEM reference: 72902-01BK.
• The 6-position male connector is supplied uninstalled to allow the wiring to be routed through the handlebar.
• Pin configuration: 1 black, 2 white, 3 red; 4 black, 5 white and 6 red identified with blue tape around the assembly.

Use and purpose

• Suitable for replacing the throttle grip sensor on motorcycles equipped with electronic throttle control.
• Especially practical for installations with internal handlebar wiring.
• When fitting the grip, make sure it is firmly engaged with the drive gear to prevent damage.

Compatibility / recommended use

• Compatible with Harley-Davidson motorcycles equipped with e-throttle from 2008 to 2013.
• Check your electronic throttle configuration and connections before placing your order.

At Iguana Custom you will find Namz replacement parts designed to maintain the feel, reliability and finish of your Harley-Davidson at the level every ride deserves.