25 MM WHEEL BEARING FOR ABS HARLEY-DAVIDSON 2008-2026

Restore proper wheel operation with this original-style replacement bearing for Harley-Davidson motorcycles equipped with ABS. It is designed for installation on the side where the ABS sensor is located, on either the front or rear wheel, while maintaining the intended configuration for original-diameter wheels.

Main features

• Part type: wheel bearing for models with ABS.
• Dimensions: 25 mm inner diameter, 52 mm outer diameter and 18 mm depth.
• Fitting position: ABS sensor side.
• Application: suitable for the front or rear wheel, depending on the compatible model.
• Contents: 1 bearing is used per wheel.
• Wheel configuration: compatible only with the original wheel diameter.
• Replaces original OEM references: 9252, 9252A, 9252B

Purpose and use

• Suitable for replacing a worn bearing in ABS wheel systems.
• An option designed to maintain the motorcycle’s original configuration.
• It is advisable to check the bearing condition during wheel, axle or brake system maintenance.
• Installation must respect the specific position on the ABS sensor side.

Compatibility / recommended use

• Harley-Davidson with ABS, front or rear wheel, model years 2008 to 2026.
• Compatible with models equipped with ABS and the original wheel diameter.
• Not suitable for wheels with a different diameter from the original.
• Before ordering, confirm that the bearing being replaced corresponds to the ABS sensor side.

At Iguana Custom you will find replacement parts to keep your Harley-Davidson ready to ride, with the technical information needed to choose each component with greater confidence.