REAR WHEEL BEARING KIT ALL BALLS RACING FOR HARLEY-DAVIDSON TOURING ABS 2008-2026

All Balls Racing Rear Wheel Bearing Kit for Harley-Davidson Touring ABS

Restore the smooth rotation and reliability of your Harley-Davidson's rear wheel with this All Balls Racing bearing kit for FLT/Touring models equipped with ABS. Designed for motorcycles manufactured between 2008 and 2026, it includes the sealed bearings needed to renew the assembly with components made to operate at high speeds and temperatures.

The bearings are manufactured with ABEC 3 precision level and lubricated with high-performance, high-temperature Chevron grease, SRI 2 rating. In addition, they feature triple-lip seals that help prevent the entry of water, dust, and other debris, providing greater protection during daily use and long-distance travel.

Main features

• Kit for rear wheel of Harley-Davidson FLT/Touring with ABS.
• 25 mm inner diameter.
• Includes three standard sealed bearings and one sealed bearing for ABS.
• Manufactured with ABEC 3 precision.
• Suitable for speeds over 10,000 rpm.
• Operating range between -20 °C and +150 °C.
• Lubricated with high-performance Chevron SRI 2 grease.
• Grease with antioxidant and anti-corrosion additives.
• Triple-lip seals against water and dirt.
• Replacement for the indicated OEM references.

Technical data

Harley-Davidson compatibility

Compatible with the rear wheel of Harley-Davidson FLT/Touring models with ABS from 2008 to 2026.

• Harley-Davidson FLT / Touring with ABS: 2008-2026.
• Mounting position: rear wheel.

Before ordering, check that the motorcycle is equipped with ABS, uses 25 × 52 × 15 mm bearings, and that the original references match those indicated.

Equivalent OEM references

• Harley-Davidson 9276A.
• Harley-Davidson 9276B.
• Harley-Davidson 9252A.
• Harley-Davidson 9552B.

OEM references are used solely to facilitate identification of the compatible application. This product is not an original Harley-Davidson part.

Protection and lubrication

The triple-lip seals help limit the entry of water and contaminant particles into the bearing. The Chevron SRI 2 grease used contains additives against corrosion and oxidation, and is prepared to operate within a wide thermal range.

Installation

During assembly, the axle, spacers, wheel housings, and other related components should be checked. The bearings must be installed using appropriate tools, applying pressure only on the corresponding race to avoid damage.

The bearing intended for the ABS system must be placed in the position and orientation specified in the service manual. After assembly, check the free rotation of the wheel, the absence of play, and the correct operation of the ABS system.

It is recommended that installation be carried out by a qualified professional.