REAR BRAKE MASTER CYLINDER COVER GASKET SPORTSTER 2004-2006

Gasket for rear brake master cylinder cover Harley-Davidson Sportster

Renew the seal of your Sportster's brake fluid reservoir with this replacement gasket for the rear brake master cylinder cover. Designed for OEM-style reservoirs, it allows you to replace a hardened, deformed, or deteriorated gasket and restore proper sealing of the assembly.

A gasket in good condition helps prevent brake fluid leaks and reduces the entry of moisture, dust, or dirt into the reservoir. It is an essential replacement during maintenance tasks, fluid changes, or repair of the rear brake system.

Main features

• Replacement gasket for the rear brake reservoir cover.
• Designed for OEM-style brake master cylinder reservoirs.
• Helps maintain a tight seal on the reservoir.
• Suitable for replacing worn, deformed, or damaged gaskets.
• Specific application for Harley-Davidson XL Sportster 2004-2006.
• Does not include cover, reservoir, or brake master cylinder.

Technical data

Harley-Davidson compatibility

Compatible with Harley-Davidson XL Sportster models from 2004 to 2006 equipped with OEM-style rear brake master cylinder reservoir.

• Harley-Davidson XL Sportster: 2004-2006.
• Mounting position: rear brake master cylinder.

Before ordering, check the year, exact model, and that the master cylinder still has the original configuration reservoir and cover. Aftermarket master cylinders may use different gaskets.

Installation and maintenance

Before installing the gasket, carefully clean the mating surface of the cover and reservoir. Do not use sharp tools or products that could damage the gasket or contaminate the brake fluid.

Place the gasket without twisting or folding and tighten the cover screws evenly, following the procedure indicated in the service manual. Use only the type of brake fluid specified for the motorcycle.

After assembly, check that there are no leaks around the cover. Brake fluid can damage painted, chrome, or plastic surfaces, so any spill should be cleaned immediately following the manufacturer's recommendations.